Wednesday, 17 May 2017

MPPT Plug & Play Solar Power Street Light

Plug & Play Solar Power Street Light


1: Solar panel should be adjustable/rotatable.     
The solar panel should be always face to sun properly in order to get the highest using efficiency as much as possible, All in one solar street light cannot be adjusted, for the solar panel is fixed. Auroras's HELIOS solar light is perfect to solve this problem. Easy for customers' installation.

2: Solar panel should big enough to generate power for daily use.
The solar panel of all in one solar street light is installed at backside of light. it causes very hard to enlarge the solar panel. so there is always not enough electricity generated for daily use.2: HELIOS solar light separate solar panel, It is free to use smaller or bigger solar panel according to project's actual situation. and customer can only buy solar light head only if there is solar panel in stock. Saving cost.

3: Battery Capacity Should be Big Enough:
Big battery supports good lighting performance at night without darkness, HELIOS solar light is using 50% big capacity than all in one solar light, it supports continuously 100% power output for 10 hours per day. All-in-one only can work in energy saving mode.

4: Different Lighting Results with same power
All in one 20W only gives 800-900lm at night. it creates a not brightness on road.
HELIOS 20W, gives more than 2400lm continuously more than 10 hours freely.

No comments:

Post a Comment